Step 1 - Preparation Step Use the leaflet for detailed instructions. Read & retain all instructions and safety information before use. Inspect the bag and gloves thoroughly before use. The gloves provided are for convenience only. Long rubber gloves are recommended. Do not use the bag or gloves if they are damaged in any way. Wear gloves and ensure arms and wrists are covered at all times. Protect surfaces thoroughly from any leakage, taking care not to let the solution drip onto areas not intended to be cleaned.
Step 2 - Place no more than 2 racks in the bag taking care not to tear or puncture the bag, then add 1/2 - 3/4 of the solution into the bag. Remove air from bag and seal, fold around the racks, then tilt the bag to coat the trays. Leave to soak for 4 hours, ideally overnight.
Step 3 - Pour the remaining solution in the oven. Carefully apply with a sponge. Leave to soak for 4 hours, ideally overnight.
Step 4 - Remove racks without reaching inside and rinse carefully with hot soapy water. From inside the oven, remove residue with sponge and rinse with hot soapy water
Step 5 - Wear gloves and keep arms fully covered at all times. Bag Partially fill with water, seal and tilt so the solution collects in one bottom corner of the bag, cut off the other corner and then tilt back to allow the residue to be safely poured down the sink immediately with running water. Bottle Simply rinse with water and dispose of in a safe way immediately after use.
Do:
- Read the preparation steps before use.
- Keep bottle cap securely closed when not in use.
- Double check surface material before applying and refer to manufacturer's instructions.
- Test on an inconspicuous area prior to use. If in doubt, do not use.
- Suitable for use on most common stainless steel and enamel surfaces
- Ventilate the room during and after use.
- Rinse and dry hands after use.
- Store product at room temperature out of reach of children.
